# How to Install and Connect Your ELD Device

Easily install the ELD device into your truck and connect your ELD device to the Matrack ELD Driver App by following these step-by-step instructions. Proper pairing ensures accurate tracking of your driving hours. For further assistance, refer to the detailed guide or watch the instructional video for a complete walkthrough.

### **Setup Guide**

You can also follow the steps below to complete the connection process.

{% stepper %}
{% step %}

### **Gather the Required Materials**

Before proceeding, ensure:

* You are in the truck where the ELD will be installed.
* You have the Matrack ELD device and the provided connecting cable.
  {% endstep %}

{% step %}

### **Install the ELD Device**

* Plug the ELD device into your truck using the connecting cable.

<div align="left"><figure><img src="https://3872183707-files.gitbook.io/~/files/v0/b/gitbook-x-prod.appspot.com/o/spaces%2FTBk5ly0PI6mwf3CgyOBo%2Fuploads%2FNxc9gF3JjYXA9Dfab8cD%2Fimage.png?alt=media&#x26;token=f823d540-26ea-4de7-9123-132754c61c47" alt=""><figcaption></figcaption></figure></div>

* Turn on the truck to power the ELD.
* Observe the light on the ELD device:

The orange/amber LED should blink once per second.

<div align="left"><figure><img src="https://3872183707-files.gitbook.io/~/files/v0/b/gitbook-x-prod.appspot.com/o/spaces%2FTBk5ly0PI6mwf3CgyOBo%2Fuploads%2FUZumJOW6JxSHU4TZETDe%2Fimage.png?alt=media&#x26;token=ed490d86-d9fd-4770-b257-6700ca5e86e8" alt="" width="375"><figcaption></figcaption></figure></div>

If it doesn’t, turn off the truck, wait a few seconds, and turn it back on. Check the light pattern again.
{% endstep %}

{% step %}

### **Enable Bluetooth on Your Phone**

* Log in to the Matrack ELD Driver App.
  * Enter your username and password.
  * Allow all permissions and wait for the complete login.
* Open your phone’s Bluetooth settings and ensure Bluetooth is enabled. The app may redirect you to these settings automatically.
* Once Bluetooth is on, return to the app and tap Confirm.
* Navigate to Dashboard:
  * Tap the hamburger menu (≡) in the top-left corner and select "Dashboard" from the Menu..
    {% endstep %}

{% step %}

### **Select Your Vehicle**

* Tap the hamburger icon to open the menu.

<div align="left"><figure><img src="https://3872183707-files.gitbook.io/~/files/v0/b/gitbook-x-prod.appspot.com/o/spaces%2FTBk5ly0PI6mwf3CgyOBo%2Fuploads%2F0yhR8WtRx6cyzfYiU068%2Fimage.png?alt=media&#x26;token=44bf5839-838f-486c-ae6e-69beafa737b0" alt="" width="375"><figcaption></figcaption></figure></div>

* Look for the "Select Vehicle" option.

<div align="left"><figure><img src="https://3872183707-files.gitbook.io/~/files/v0/b/gitbook-x-prod.appspot.com/o/spaces%2FTBk5ly0PI6mwf3CgyOBo%2Fuploads%2FX8jNBmQOCuaO5dIJLnG6%2Fimage.png?alt=media&#x26;token=6f4e8a73-fec0-40a3-a21d-3019fffa4ec9" alt="" width="405"><figcaption></figcaption></figure></div>

* Scroll through available vehicles.

<div align="left"><figure><img src="https://3872183707-files.gitbook.io/~/files/v0/b/gitbook-x-prod.appspot.com/o/spaces%2FTBk5ly0PI6mwf3CgyOBo%2Fuploads%2FwY5VEdVFBk82vhIwcF7L%2Fimage.png?alt=media&#x26;token=6834784e-aaa5-4a7e-8e98-f8a2e08cdb67" alt="" width="328"><figcaption></figcaption></figure></div>

* Verify the correct vehicle details and select your vehicle.
* **Connection screen :**
  * The app automatically redirects to the connection screen.
  * Alternative method: Go to Dashboard and tap the Bluetooth icon in the top-right corner. The connection screen will appear.
  * To access the Dashboard: Tap the hamburger menu (≡) in the top-left corner and select "Dashboard" from the Menu.&#x20;
    {% endstep %}

{% step %}

### **Scan and Connect the ELD**

* Verify that the correct ELD device is selected.

  * Look for **PT30** or **MT3**0 on the device label. If the label says PT30, select PT in the app. If it's MT30, select MT in the app.

  <div align="left"><figure><img src="https://3872183707-files.gitbook.io/~/files/v0/b/gitbook-x-prod.appspot.com/o/spaces%2FTBk5ly0PI6mwf3CgyOBo%2Fuploads%2FjFh2fZDC4DMPyr0YDPrL%2Fimage.png?alt=media&#x26;token=0c9d7724-f175-42a7-81da-71812dded394" alt="" width="299"><figcaption></figcaption></figure></div>

  * Choose connection method:
    * **Option A: Scan and Connect (Recommended)**

      * Choose the correct device type: PT/MT
      * Select Scan and Connect.
      * Tap the "Connect to BLE" button and wait for the scan to complete.

      <div align="left"><figure><img src="https://3872183707-files.gitbook.io/~/files/v0/b/gitbook-x-prod.appspot.com/o/spaces%2FTBk5ly0PI6mwf3CgyOBo%2Fuploads%2Fbi7rmNyyopit0TsLe5mD%2Fimage.png?alt=media&#x26;token=947f3cb2-85b0-48d9-969d-1bf34414bf1e" alt="" width="299"><figcaption></figcaption></figure></div>

      * Select your ELD from the available device list box.
      * You should see the ELD Device Connected message.
    * **Option B: Manual Connection**

      * Choose the correct device type: PT/MT
      * Select the "Manual" option.

      <div align="left"><figure><img src="https://3872183707-files.gitbook.io/~/files/v0/b/gitbook-x-prod.appspot.com/o/spaces%2FTBk5ly0PI6mwf3CgyOBo%2Fuploads%2FJZPGvNCS4u3EuddpCeME%2Fimage.png?alt=media&#x26;token=d4f20928-5848-4a64-9204-1f5c41b751ba" alt="" width="496"><figcaption></figcaption></figure></div>

      * Locate the MAC ID on the ELD label and enter the MAC ID as shown.

      <div align="left"><figure><img src="https://3872183707-files.gitbook.io/~/files/v0/b/gitbook-x-prod.appspot.com/o/spaces%2FTBk5ly0PI6mwf3CgyOBo%2Fuploads%2FniWNTJ4PCd8BLDVWjMWE%2FManual%20Connection.JPG?alt=media&#x26;token=3d3051d3-ee26-4cf6-91c4-8569fdb3bda3" alt="" width="375"><figcaption></figcaption></figure></div>

      * Tap "Connect to BLE."

      <div align="left"><figure><img src="https://3872183707-files.gitbook.io/~/files/v0/b/gitbook-x-prod.appspot.com/o/spaces%2FTBk5ly0PI6mwf3CgyOBo%2Fuploads%2F5ogMx8rVZAOwJ5hY0qDD%2Fimage.png?alt=media&#x26;token=fcdbc403-19bc-4f4e-b968-00583a3bffa3" alt="" width="442"><figcaption></figcaption></figure></div>

      * You should see the ELD Device Connected message
        {% endstep %}
        {% endstepper %}

{% hint style="warning" %}
**Important Information & Tips**

* Monitor truck icon colors:\
  Red = Bluetooth not  connected\
  Orange = Bluetooth connected, Ignition off\
  Green = Bluetooth connected, Ignition on
* Listen for the "Bluetooth Connected" audio message
* Watch for "ELD Device Connected" on screen
* Contact the Fleet Manager if:
  * You're not in the system
  * The vehicle isn't listed
  * Connection issues persist<br>
    {% endhint %}


---

# Agent Instructions: Querying This Documentation

If you need additional information that is not directly available in this page, you can query the documentation dynamically by asking a question.

Perform an HTTP GET request on the current page URL with the `ask` query parameter:

```
GET https://help.matrack.io/eld/readme/categories/matrack-eld-driver-app-guides/how-to-install-and-connect-your-eld-device.md?ask=<question>
```

The question should be specific, self-contained, and written in natural language.
The response will contain a direct answer to the question and relevant excerpts and sources from the documentation.

Use this mechanism when the answer is not explicitly present in the current page, you need clarification or additional context, or you want to retrieve related documentation sections.