search

Dashcam - JC261

hashtag
MA Dashcam JC261 Installation Guide

hashtag
What's in the Box

  • JC261 Main Unit

  • Power Bundle

  • External SOS Key

  • Relay

  • Tamper Cover

  • Mounting Screws

  • Bracket

  • Philips Screwdriver

  • Tamper Lock

hashtag
System Components

hashtag
Main Unit

The main unit includes:

  • Power LED

  • GPS LED

  • GSM LED

  • Front camera (1080P)

hashtag
DMS Camera

Dedicated driver monitoring camera with mounting base

hashtag
Installation Instructions

hashtag
Step 1: Mounting Preparation

  1. Select a proper installation position on the windshield

  2. Clean the position thoroughly with the provided cleaning wipe

  3. Remove the protective film from the 3M tape on the mounting base

  4. Attach the base to the cleaned position

  5. Wait 2 hours before proceeding to ensure proper adhesion

hashtag
Step 2: Cable Connections

  1. Connect the OBD power supply cable to the main unit's power terminal

    • Align the groove for easy cable insertion

  2. Connect the DMS camera to the 4-pin female circular and rectangular ports

  3. Connect the main power cable to the OBD port terminal

hashtag
Step 3: Cable Routing

  1. Route all cables (OBD power, DMS camera & backup battery) along the A-pillar

  2. Guide cables to the upper center of the windshield

  3. Connect the OBD power cable to the vehicle's OBD port

hashtag
Step 4: DMS Camera Installation

  1. Remove the adhesive tape from the bottom of the DMS camera

  2. Position the camera on the dashboard at approximately 30° angle to the steering wheel

  3. Ensure the camera directly faces the driver

hashtag
Step 5: System Verification

  1. Turn on the vehicle ignition to power up the dashcam

  2. Verify LED indicators (refer to LED Status table)

  3. Check camera functionality:

    • Log into the platform using the provided credentials

    • Verify live video feed

    • Test camera switching functionality

    • Adjust camera positioning if needed

hashtag
Important Notes

  • Ensure proper cable routing to avoid interference with vehicle operation

  • Wait full 2 hours after mounting base installation before attaching device

  • Verify all connections before the final assembly

  • Test the system thoroughly before regular use

Need additional assistance? Contact our 24/7 Support Center:

Last updated