MA Dashcam M4000

MA DASHCAM M4000 INSTALLATION GUIDE

What's in the Box

1. OBD POWER CABLE - Power connection cable for your vehicle's OBD port

2. GPS ANTENNA CABLE - External GPS antenna

3. M4000 DASHCAM - The primary dashcam device

4. WINDSHIELD SCREEN AND SIM DRAWER PIN - Mounting accessories and SIM card tool

LED Indicator Guide

The M4000 Dashcam has three LED indicators:

1. AMBER: POWER

2. PINK: CELLULAR

3. BLUE: GPS

Simple OBD Port Plug & Play Installation

Step 1

A. Select a proper installation position and wipe the position clean.

B. Remove the protective film from the 3M tape of the mounting base and attach it to the position. Wait for 2 hours before proceeding to the next step. (See A for reference)

C. Mount the device to the base and connect its power cable correctly (see B for reference).

Step 2

1. Connect the OBD power supply cable with the power terminal on the main unit. Align the grove to easily slide the cable.

1. Connect the GPS Antenna cable by plugging it into the small port with 4 pins.

Step 3

Route the OBD power, GPS Antenna cable & optional SOS button cables along the A pillar of the vehicle to the upper center of the windshield as shown in the figure. (refer D, blue dashed line)

Once these cables are connected, plug the other end of the OBD power cable into the rectangular OBD port of the vehicle (reference position C).

Step 4

I. Check the LED status (see LEDs table for reference and image above)

II. Check the camera. The camera is working correctly if you can view the live video of the camera and switch between the two cameras after logging in to the platform with the provided credentials via email. You can also manually adjust the positioning of the camera lens according to your needs.

Support Information

24/7 Support Center Phone: +1-855-658-7225 Email: [email protected]