How to Connect Your ELD Device

Here is the Step-by-Step Guide for Connecting Your ELD Device with the Matrack App

Easily connect your ELD device to the Matrack ELD Driver App by following these step-by-step instructions. Proper pairing ensures accurate tracking of your driving hours. For further assistance, refer to the detailed guide or watch the instructional video for a complete walkthrough.

Access the Setup Guide

You can also follow the below steps to complete the connection process.

1

Gather the Required Materials

Before proceeding, ensure you have:

• The truck where the ELD will be installed.

• The Matrack ELD device. and the provided connecting cable.

2

Install the ELD Device

• Plug the ELD device into your truck using the connecting cable.

• Turn on the truck to power the ELD.

• Observe the light on the ELD device:

The orange/amber LED should blink once per second.

If it doesn’t, Turn off the truck, wait a few seconds, and turn it back on. Check the light pattern again.

3

Enable Bluetooth on Your Phone

• Log into the Matrack ELD Driver App

  • Enter your username and password

  • Allow all permissions and Wait for the complete login

• Open your phone’s Bluetooth settings and ensure Bluetooth is enabled. The app may redirect you to these settings automatically.

• Once Bluetooth is on, return to the app and tap Confirm.

• Navigate to Dashboard:

  • Tap the hamburger menu (≡) in the top-left corner and Select "Dashboard" from the Menu

4

Select Your Vehicle

• Tap the hamburger icon to open the menu

• Look for the "Select Vehicle" option

• Scroll through available vehicles

• Verify correct vehicle details and select your vehicle

• Connection screen :

  • The app automatically redirects to the connection screen

  • Alternative method: Go to Dashboard and Tap the truck icon in the top-right corner. The connection screen will appear.

  • To access the Dashboard: Tap the hamburger menu (≡) in the top-left corner and Select "Dashboard" from the Menu.

5

Scan and Connect the ELD

• Verify that the correct ELD device is selected

  • Look for PT30 or MT30 on the device label. If the label says PT30 select PT in the app. If it's MT30, select MT in the app.

  

  • Choose connection method:

    • Option A: Scan and Connect (Recommended)

      • Choose the correct device type: PT/MT

      • Select Scan and Connect

      • Tap the "Connect to BLE" button and Wait for the scan to complete

      

      • Select your ELD from the available device list box

      • You should see the ELD Device Connected message

    • Option B: Manual Connection

      • Choose the correct device type: PT/MT

      • Select the "Manual" option

      • Locate the MAC ID on the ELD label and Enter the MAC ID as shown

      

      • Tap "Connect to BLE"

      • You should see the ELD Device Connected message

Important Information & Tips

• Monitor truck icon colors: Orange = Bluetooth not connected Red = Engine on, Bluetooth connected Green = Ignition and Bluetooth connected

• Listen for the "Bluetooth Connected" audio message

• Watch for "ELD Device Connected" on screen

• Contact Fleet Manager if:

  • You're not in the system

  • The vehicle isn't listed

  • Connection issues persist